| 1. | We have shown surface tractions on three rectangular boundary surfaces of the body .
在这个单元体的三个互相垂直的边界上，我们指明了作用在这些边界面上的面力。 |
| 2. | In practice, two semisilvered or aluminized glass optical flats form the reflecting boundary surface .
实际上，两块半镀银的或镀铝的光学平面玻璃构成了反射界面。 |
| 3. | Boundary surface model
边界面模型 |
| 4. | Wave propagation in a liquid - saturated porous solid with micropolar elastic skeleton at boundary surface
所对应的重力波拖曳比反向切变 |
| 5. | Each virtual simple shear mechanism is simulated by boundary surface plasticity model in the virtual stress and strain space
其中最明显的是位于与实际单剪方向一致的虚拟单剪机构。 |
| 6. | In this paper , a new interface - searching algorithm - boundary cell method ( bcm ) based on the fact that interface happens on the boundary surface is presented particularly
在接触问题中，接触搜寻是极其重要的。为此，本文提出了一种新的接触搜寻法? ?边界子域法( bcm ) 。 |
| 7. | The equations of workspace boundary surfaces for double - octahedron variable geometry truss pmts are derived based on surface analysis method . the projection and section curve grapha of workspace boundary surfaces for double - octahe
推导出了zrps ztps型及m 3tps型并联机床运动学分析的一阶和二阶影响系数矩阵，得到了其运动学模型。 |
| 8. | We find that the behavior of this energy as a function of the boundary surface radius is similar to those of the static black holes , and that the energy at the horizon does reduce to the expression conjectured by martinez
我们发现该能量作为径向坐标的函数的表现行为与静态时的情形很类似，而且在事件视界处它确实符合martinez猜测。 |
| 9. | Derived from the concept and character of the voltage collapse boundary surface , the discussion on the principles of the advancing analysis and the preventive control of the steady - state voltage stability of power system in this dissertation is illustrative , scientifical and precise
从电压崩溃边界曲面的概念与性质出发，论文提出了静态电压稳定的预测分析与预防控制新原理。 |
| 10. | The innovation of multiple mechanism boundary surface plasticity model is that the effect of rotation of principal stress axial directions and large shear displacement of sand in the earthquake induced liquefaction are taken into account at the same time in the model
独到之处在于所建立的多机构边界面塑性模型能够同时考虑土体在复杂荷载作用下主应力轴旋转的影响和砂土地震液化时剪切大位移特性。 |
